FTP, problem with user Password in 804 beta
Posted: 04.12.2019, 20:14
Hello Marek,
I would like to report a problem that has occupied me for several days. On the PC of a friend there is a strange behavior with the password in FTP.
The problem system:
Win 10 Pro Version 1909 (AMD processor) FC 804 beta portable, mobile phone Samsung S8 Android 9 with "Primitive FTP" as FTP connection.
Description of various variants for FTP connection with FC:
1. Restart FC-> New FTP -> enter data (including username / password) -> connect -> connection o.K.
2. Restart FC-> New FTP -> enter data (including username / password) -> OK button, security message password, window closes, -> double-click
on connection name -> connection o.K.
3. Restart FC-> New FTP -> enter data (including username / password) -> OK button, security message password, close window, -> save settings-> double-click on connection name -> connection o.K. After restarting the FC, the data should actually be stored correctly. But ... ..-> see 4.
4. Restart the FC -> double-click on connection name -> no access to mobile phone
Error message in the window below:
220 Service ready for new user
331 Usename ok, need password for ...
530 530 Authentication failed
This is fully reproducible on this PC, even with other phones or tablets.
In the "FreeCommander.FTP" all data seems to be correct, FtpUserPass = encrypted and therefore not testable for me. I have the assumption that when saving the "FreeCommander.FTP" something happens with the password. As long as the FC is not closed, other devices can be detected and the connections work.
Once the FC is closed and restarted, the password problem always occurs. If the password is reentered in the same session, everything will work again until the next reboot.
Further investigations:
On the "problem PC" the FTP connections on test installations of Total Commander and Double Commander work perfectly.
On my own PC with Win 10 Pro 1909 (Intel) and FC 804 portable the connection works with the same S8 and all other devices without problems as it should.
Where could be the cause? I am at a loss!
Miscellaneous:
I wanted to attach a file, but I can not navigate to the desired file on board and select. Where is the trick?
Hugo
I would like to report a problem that has occupied me for several days. On the PC of a friend there is a strange behavior with the password in FTP.
The problem system:
Win 10 Pro Version 1909 (AMD processor) FC 804 beta portable, mobile phone Samsung S8 Android 9 with "Primitive FTP" as FTP connection.
Description of various variants for FTP connection with FC:
1. Restart FC-> New FTP -> enter data (including username / password) -> connect -> connection o.K.
2. Restart FC-> New FTP -> enter data (including username / password) -> OK button, security message password, window closes, -> double-click
on connection name -> connection o.K.
3. Restart FC-> New FTP -> enter data (including username / password) -> OK button, security message password, close window, -> save settings-> double-click on connection name -> connection o.K. After restarting the FC, the data should actually be stored correctly. But ... ..-> see 4.
4. Restart the FC -> double-click on connection name -> no access to mobile phone
Error message in the window below:
220 Service ready for new user
331 Usename ok, need password for ...
530 530 Authentication failed
This is fully reproducible on this PC, even with other phones or tablets.
In the "FreeCommander.FTP" all data seems to be correct, FtpUserPass = encrypted and therefore not testable for me. I have the assumption that when saving the "FreeCommander.FTP" something happens with the password. As long as the FC is not closed, other devices can be detected and the connections work.
Once the FC is closed and restarted, the password problem always occurs. If the password is reentered in the same session, everything will work again until the next reboot.
Further investigations:
On the "problem PC" the FTP connections on test installations of Total Commander and Double Commander work perfectly.
On my own PC with Win 10 Pro 1909 (Intel) and FC 804 portable the connection works with the same S8 and all other devices without problems as it should.
Where could be the cause? I am at a loss!
Miscellaneous:
I wanted to attach a file, but I can not navigate to the desired file on board and select. Where is the trick?
Hugo