Integrate TeraCopy ?
Integrate TeraCopy ?
Is it possible to use teracopy with FreeCommander ?
Read more about TeraCopy here...
www(dot)codesector(dot)com/teracopy(dot)php
Thanks
rrrhre2s
Read more about TeraCopy here...
www(dot)codesector(dot)com/teracopy(dot)php
Thanks
rrrhre2s
-
- Posts: 6
- Joined: 21.07.2008, 12:16
Re: Integrate TeraCopy ?
Close Free Commander
Add the following lines to the FreeCommander.ini in [Form] section
(* - required here)
Don't forget to set real location of TeraCopy
Start Free Commander and have Fun
P.S. You can use the portable TeraCopy version
Add the following lines to the FreeCommander.ini in [Form] section
Code: Select all
FileMovePrg=C:\Program Files\TeraCopy\TeraCopy.exe Move *%ActivSelAsFile% "%InactivDir%"
FileCopyPrg=C:\Program Files\TeraCopy\TeraCopy.exe Copy *%ActivSelAsFile% "%InactivDir%"
Don't forget to set real location of TeraCopy
Start Free Commander and have Fun
P.S. You can use the portable TeraCopy version
-
- Posts: 33
- Joined: 09.12.2007, 17:30
- Contact:
Re: Integrate TeraCopy ?
Very cool!! That works even with the TeraCopy beta on both XP and Vista!Aid_Belial wrote:Close Free Commander
Add the following lines to the FreeCommander.ini in [Form] section(* - required here)Code: Select all
FileMovePrg=C:\Program Files\TeraCopy\TeraCopy.exe Move *%ActivSelAsFile% "%InactivDir%" FileCopyPrg=C:\Program Files\TeraCopy\TeraCopy.exe Copy *%ActivSelAsFile% "%InactivDir%"
Don't forget to set real location of TeraCopy
Start Free Commander and have Fun
P.S. You can use the portable TeraCopy version
thank u very much!!
it is working. u made me so happy
only undo option could make me happier
EDIT: no, NOT working for me anymore. cut - paste not moving neither copy - paste is copying, teracopy window stays with an empty list, or some strange copying or weird freecommander behavior.
copy move button on the toolbar are working
EDIT:
FreeCommander 2008.6a Portable & TeraCopy 2.0 beta 3 Portable is working just fine for me. i copied TeraCopy folder in the FreeCommander folder edited [Form]
with this code
FileMovePrg=C:\FreeCommanderPortable\TeraCopyPortable\TeraCopy.exe Move *%ActivSelAsFile% "%InactivDir%"
FileCopyPrg=C:\FreeCommanderPortable\TeraCopyPortable\TeraCopy.exe Copy *%ActivSelAsFile% "%InactivDir%"
and i'm very happy that it's finally working:)
it is working. u made me so happy
only undo option could make me happier
EDIT: no, NOT working for me anymore. cut - paste not moving neither copy - paste is copying, teracopy window stays with an empty list, or some strange copying or weird freecommander behavior.
copy move button on the toolbar are working
EDIT:
FreeCommander 2008.6a Portable & TeraCopy 2.0 beta 3 Portable is working just fine for me. i copied TeraCopy folder in the FreeCommander folder edited [Form]
with this code
FileMovePrg=C:\FreeCommanderPortable\TeraCopyPortable\TeraCopy.exe Move *%ActivSelAsFile% "%InactivDir%"
FileCopyPrg=C:\FreeCommanderPortable\TeraCopyPortable\TeraCopy.exe Copy *%ActivSelAsFile% "%InactivDir%"
and i'm very happy that it's finally working:)
enjoying to use FreeCommander :)
Your problem is in fact simple, you were not editing the right FreeCommander.ini.
There is a settings in FreeCommander to choose how to use the ini file.
+The first solution is to use only one ini file, in the freecommander folder (like with the portable version).
+The second one, much useful if you have multiple users account with différent settings all using FC, is to use an ini file stored in
C:\Documents and Settings\%user%\Application Data\FreeCommander
It's this one you must edit to add the Teracopy config lines for FC to use teracopy as copier handler if you are using the application data ini method of FC (i just found it out after a few tries .
I hope it can help people.
There is a settings in FreeCommander to choose how to use the ini file.
+The first solution is to use only one ini file, in the freecommander folder (like with the portable version).
+The second one, much useful if you have multiple users account with différent settings all using FC, is to use an ini file stored in
C:\Documents and Settings\%user%\Application Data\FreeCommander
It's this one you must edit to add the Teracopy config lines for FC to use teracopy as copier handler if you are using the application data ini method of FC (i just found it out after a few tries .
I hope it can help people.
-
- Posts: 250
- Joined: 25.07.2008, 12:54
-
- Posts: 250
- Joined: 25.07.2008, 12:54
Re: Integrate TeraCopy ?
Aid_Belial wrote:Close Free Commander
Add the following lines to the FreeCommander.ini in [Form] section(* - required here)Code: Select all
FileMovePrg=C:\Program Files\TeraCopy\TeraCopy.exe Move *%ActivSelAsFile% "%InactivDir%" FileCopyPrg=C:\Program Files\TeraCopy\TeraCopy.exe Copy *%ActivSelAsFile% "%InactivDir%"
Don't forget to set real location of TeraCopy
Start Free Commander and have Fun
P.S. You can use the portable TeraCopy version
This works with the latest TeraCopy 2.1 Free and the latest 2009a final build of Free Commander.
Thanks much
Re: Integrate TeraCopy - make it real portable
and to make it real portable:
1. install TeraCopy Portable (to demonstrate, I have saved it 3 levels below FreeCommanderPortable)
2. Change FreeCommanderPortable\Data\settings\FreeCommander.ini
under [Form] (there: internal linkage to the 3 levels below installed TeraCopy Portable):
FileMovePrg=..\..\..\TeraCopyPortable\TeraCopy.exe Move *%ActivSelAsFile% "%InactivDir%"
FileCopyPrg=..\..\..\TeraCopyPortable\TeraCopy.exe Copy *%ActivSelAsFile% "%InactivDir%"
thats it. Now you have a portable FreeCommander with an TeraCopy possibility every time.
1. install TeraCopy Portable (to demonstrate, I have saved it 3 levels below FreeCommanderPortable)
2. Change FreeCommanderPortable\Data\settings\FreeCommander.ini
under [Form] (there: internal linkage to the 3 levels below installed TeraCopy Portable):
FileMovePrg=..\..\..\TeraCopyPortable\TeraCopy.exe Move *%ActivSelAsFile% "%InactivDir%"
FileCopyPrg=..\..\..\TeraCopyPortable\TeraCopy.exe Copy *%ActivSelAsFile% "%InactivDir%"
thats it. Now you have a portable FreeCommander with an TeraCopy possibility every time.
Re: Integrate TeraCopy - make it real portable
Doesn't work for me!Jaro wrote:and to make it real portable:
1. install TeraCopy Portable (to demonstrate, I have saved it 3 levels below FreeCommanderPortable)
2. Change FreeCommanderPortable\Data\settings\FreeCommander.ini
under [Form] (there: internal linkage to the 3 levels below installed TeraCopy Portable):
FileMovePrg=..\..\..\TeraCopyPortable\TeraCopy.exe Move *%ActivSelAsFile% "%InactivDir%"
FileCopyPrg=..\..\..\TeraCopyPortable\TeraCopy.exe Copy *%ActivSelAsFile% "%InactivDir%"
thats it. Now you have a portable FreeCommander with an TeraCopy possibility every time.
http://www.freecommander.com/fc_guide_g ... ons_en.htm Drive Variables for portable use --- Reading here!
For example:
If FreeCommanderPortable installed in [usb driveletter]:\Program Files\FreeCommanderPortable\
and TeraCopy Portable - [usb driveletter]:\Program Files\TeraCopy Portable\
Change FreeCommanderPortable\Data\settings\FreeCommander.ini under [Form]
Code: Select all
FileMovePrg=%FcSrcDrive%\Program Files\TeraCopy Portable\TeraCopy.exe Move *%ActivSelAsFile% "%InactivDir%"
FileCopyPrg=%FcSrcDrive%\Program Files\TeraCopy Portable\TeraCopy.exe Copy *%ActivSelAsFile% "%InactivDir%"
Jaro wrote:thats it. Now you have a portable FreeCommander with an TeraCopy possibility every time.
Agreed!:)
FreeCommander_Portable_2009.02a.paf
TeraCopy Portable Version 2.0 beta 3
Sorry for bad English.
Re: Integrate TeraCopy ?
Worked well, thank youBearded Kirklander wrote:Aid_Belial wrote:Close Free Commander
Add the following lines to the FreeCommander.ini in [Form] section(* - required here)Code: Select all
FileMovePrg=C:\Program Files\TeraCopy\TeraCopy.exe Move *%ActivSelAsFile% "%InactivDir%" FileCopyPrg=C:\Program Files\TeraCopy\TeraCopy.exe Copy *%ActivSelAsFile% "%InactivDir%"
Don't forget to set real location of TeraCopy
Start Free Commander and have Fun
P.S. You can use the portable TeraCopy version
This works with the latest TeraCopy 2.1 Free and the latest 2009a final build of Free Commander.
Thanks much
Re: Integrate TeraCopy ?
Very good, thank you! Works also well with several files selected.
Who is online
Users browsing this forum: No registered users and 106 guests