Move - Use FreeCommander problem1
Move - Use FreeCommander problem1
I always use F5 / F6 for copy and move.
Settings - File/folder operation
turn on: Move - Use FreeCommander
this won't work unless you also
turn on: Copy - Use FreeCommander
is it a bug or a feature?
confirmation?
Settings - File/folder operation
turn on: Move - Use FreeCommander
this won't work unless you also
turn on: Copy - Use FreeCommander
is it a bug or a feature?
confirmation?
(win10pro x64) - (latest FCXE x64 portable)
Re: Move - Use FreeCommander problem1
Can't confirm in 687x64 portable using default or custom settings.
Re: Move - Use FreeCommander problem1
Can't confirm either, 687 x64, Win7 x64.
Re: Move - Use FreeCommander problem1
sorry for being a bit imprecise (but the behavior was so astonishing to me)
F5 will trigger 'Move' action, but it triggers Win-Move and not FCXE-Move.
could you please re-check?
(I also used a fresh downloaded FCXE portable, and system restart)
my settings:
this is what I mistakenly get:
this is what I should get:
F5 will trigger 'Move' action, but it triggers Win-Move and not FCXE-Move.
could you please re-check?
(I also used a fresh downloaded FCXE portable, and system restart)
my settings:
this is what I mistakenly get:
this is what I should get:
(win10pro x64) - (latest FCXE x64 portable)
Re: Move - Use FreeCommander problem1
Confirmed.
Re: Move - Use FreeCommander problem1
Oh, yes, you're right! It's a bug.
Re: Move - Use FreeCommander problem1
fixed. thanks, Marek.
there is one tiny, nitpicky issue that I found after checking viewtopic.php?f=7&t=6498.
FCXE_688 does a very quick auto-refresh when moving files in plain view - you did a marvelous job here.
BUT in normal view the Move-operation takes a fairly long (1-2sec) time to auto-refresh.
I almost thought auto-refresh is broken!
there is one tiny, nitpicky issue that I found after checking viewtopic.php?f=7&t=6498.
FCXE_688 does a very quick auto-refresh when moving files in plain view - you did a marvelous job here.
BUT in normal view the Move-operation takes a fairly long (1-2sec) time to auto-refresh.
I almost thought auto-refresh is broken!
(win10pro x64) - (latest FCXE x64 portable)
Re: Move - Use FreeCommander problem1
This issue is strange...
With my custom settings, auto-refresh works good, with or without plain view, but it's much slower when using FC operations and no dialogs, auto-minimize dialogs, moving the small file takes less than a second - when using WIN operations, it's instant.
With default settings, auto-refresh doesn't work good, with or without plain view. After more testing, sometimes it works good, then it doesn't work, using the same folders and default settings, then it works good when moving a file from left to right panel, then after moving back to left panel, file is removed from the right panel correctly, but it's not refreshed on the left panel - once it's broken, it works/doesn't work the same way if I move the file several times.
Testing with default settings, 689 x64, Win7 x64, Win and FC operations for del/copy/move, normal and plain view.
Well, for now I can always confirm the auto-refresh issue always when using default settings, enable plain view, moving small file between two dirs, then change the del/copy/move operations to FC, then move the file between panels few times.
I found one more strange behavior, but I'll start a new topic for that.
With my custom settings, auto-refresh works good, with or without plain view, but it's much slower when using FC operations and no dialogs, auto-minimize dialogs, moving the small file takes less than a second - when using WIN operations, it's instant.
With default settings, auto-refresh doesn't work good, with or without plain view. After more testing, sometimes it works good, then it doesn't work, using the same folders and default settings, then it works good when moving a file from left to right panel, then after moving back to left panel, file is removed from the right panel correctly, but it's not refreshed on the left panel - once it's broken, it works/doesn't work the same way if I move the file several times.
Testing with default settings, 689 x64, Win7 x64, Win and FC operations for del/copy/move, normal and plain view.
Well, for now I can always confirm the auto-refresh issue always when using default settings, enable plain view, moving small file between two dirs, then change the del/copy/move operations to FC, then move the file between panels few times.
I found one more strange behavior, but I'll start a new topic for that.
Re: Move - Use FreeCommander problem1
just another 'Refresh' problem:
- switch to plain view
- Multi rename files (select some or select all)
- do some rename action
- close the Multi rename window
--> panel does not refresh
- switch to plain view
- Multi rename files (select some or select all)
- do some rename action
- close the Multi rename window
--> panel does not refresh
(win10pro x64) - (latest FCXE x64 portable)
Re: Move - Use FreeCommander problem1
Can't confirm the last one, tried to select some and all files, also tested with default settings.
However, auto-refresh doesn't work sometimes after delete, quite often, just can't reproduce it.
However, auto-refresh doesn't work sometimes after delete, quite often, just can't reproduce it.
Re: Move - Use FreeCommander problem1
@Dreamer
you're right.
a fresh portable FXCE has no refresh problem, but my customisation definitely has that misbehavior
you're right.
a fresh portable FXCE has no refresh problem, but my customisation definitely has that misbehavior
(win10pro x64) - (latest FCXE x64 portable)
Re: Move - Use FreeCommander problem1
tracked down the bug!!
(win10pro x64) - (latest FCXE x64 portable)
Re: Move - Use FreeCommander problem1
Sorry, I still can't reproduce it, tested with my ini and with default settings.
BTW Regarding the other issues, auto-refresh is broken sometimes, but after FC restart it works good, so it's really weird.
BTW Regarding the other issues, auto-refresh is broken sometimes, but after FC restart it works good, so it's really weird.
Re: Move - Use FreeCommander problem1
I know that there are refreshing issues - but I think it might help Marek to nail down reproducible misbehavior for him.
did you multi-rename files of a subfolder or did you just multi-rename files from the base folder?
I found out: bug only exists if multi-renaming file of a subfolder.
did you multi-rename files of a subfolder or did you just multi-rename files from the base folder?
I found out: bug only exists if multi-renaming file of a subfolder.
(win10pro x64) - (latest FCXE x64 portable)
Re: Move - Use FreeCommander problem1
I tested random and all files, when renaming only files is a subfolder, I can confirm it, finally.
Who is online
Users browsing this forum: No registered users and 1 guest